So, you have a hydrostatic lawn mower that works well on even ground but sputters or loses power when you try to mow on a slope. Finding the cause of your mower not going uphill comes in handy with determining the solution to fix your problem.
Luckily, the problem is often straightforward and you’ll only have to make a few minor adjustments to get your lawn-mowing companion back in good shape.
The hydrostatic lawn mower is certainly a game changer when it comes to mowing. This new-age machine helps you shift through varying speeds without using gears or a clutch. This means that you have more control over the mowing experience and of course dominance when it comes to direction.
But just like any other mechanical equipment, hydrostatic mowers may experience some problems at times. For instance, you may notice that your mower cuts just fine on flat ground but won’t go uphill. Thankfully, this comprehensive guide will get your hydrostatic transmission working on hills in no time. Go through it to learn all the causes and fixes of your hydrostatic equipment.
Hydrostatic Mower Won’t Go Up Hills (Why + My Solutions)
When cutting the grass at an incline, the hydrostatic drive system is put under pressure and underlying problems will start to show. Don’t get all frustrated over the hilly terrain of your lawn, if anything, you should be thankful it is giving you a heads up that your mower has a problem.
In most cases, a hydrostatic lawn mower will have a tough time going uphill due to a lack of hydrostatic oil, lack of sufficient traction on the drive belt, or hydrostatic air-lock.
Let’s dive into the intricacies as to why your hydrostatic equipment is floundering when cutting grass uphill and the possible fixes.
1. Lack of Hydro Oil in The System
A hydrostatic lawn mower uses pressurized oil as its main operation giving the user much more control over the speed and direction. The new age machine relies on hydrostatic oil for it to operate efficiently. If the hydro oil in the system is insufficient, it is replaced with air.
Just like the hydro oil is propelled to the motor, so will the air. Once the air is in the motor, it reduces the power output of the mower wheels. Remember that your lawn mower requires a lot more power while operating uphill and as such, you will experience slowness or be unable to mow uphill at all.
- Top Up Oil In The Oil reservoir
In most riding lawn mowers, the oil reservoir is located under the seat. Next, add oil up to the level indicator. Ensure that you use the specific hydraulic oil for your lawn mower – you can check the mower’s manual for the specific oil type if you are not sure.
Once you add oil to the required level, it is vital to run the purging process to eliminate any air bubbles present in the oil.
2. Insufficient Traction on the Drive Belt
Lack of traction in the drive belt can be another cause as to why your hydrostatic mower won’t go uphill. The belt and pulley system provides sufficient energy to the hydrostatic pump for your mower to function properly.
In case of dirt, grass blades, mud, or any other debris sticking on the belt or the chassis of the pulley, they will reduce the energy supplied to the hydro pump.
In addition, a loose or worn-out belt will not provide sufficient power to the hydrostatic pump. As a result, your mower will have a problem going uphill. Note that, unlike flat ground, a hilly terrain puts more demand on the hydro pump to produce more pressure.
- Clean The drive belt Area
First things first, if you suspect that your lawn mower problem originates from the drive belt, get traction back to the drive belt; you have to clean out the drive belt area. As we’ve already seen, a lawn mower works on rough areas and with time, debris may clog the belt area thus reducing traction.
The easiest way to clean is by using a powerful hose. This will help blast off the dirt build-up. Nevertheless, some dirt may be hard to remove this way and you’ll need to work on them with a scrapper – getting some dirt on your hands won’t hurt after all.
When you are done, you can turn on the engine and ride your mower for a few minutes before repeating running the hose over the belt area once again. This helps expose more dirt that would have otherwise been left on hidden parts.
Now that we’ve ruled out the presence of dirt and debris as the primary cause of the traction problem in the drive belt, we can try operating the mower uphill. If the problem persists, try out the fixes below.
- Replace The Drive Belt Tension Spring
First, you’ll need to inspect the spring. A compressed spring results in a stretched belt. A loose belt will wear out quickly so you must replace the drive belt tension spring immediately.
To remove the existing spring from its mount, you’ll need a spring-pulling tool. After, removing the old spring, you can now install the new spring using the spring puller.
- Replace The Drive Belt
In extreme cases, the belt may be worn out, and replacing the tension spring will not do your mower any good. At this point, you’ll have to replace the belt. The first thing is to remove the deck belt. Next, you’ll need a socket wrench to remove the bolts holding the clutch.
Once the bolts are off the clutch alignment, it is easier to remove the clutch and disconnect the power. With the power to the clutch disconnected, you can start the process of removing the drive belt.
Use the spring puller to remove the drive belt’s tension spring. With the tension spring off, you can now remove the loose belt from the hydro pump pulley and install a new one. However, before installing the new drive belt, it is recommended that you clean the belt drive and the pulleys to get rid of any accumulated dirt.
Also, ensure that the parts are in good shape now that everything is disconnected and easier to inspect. After installing the new belt correctly, you can now reinstall the clutch and the deck belt.
3. Hydro Air-Lock
A hydrostatic air-lock results in the same problematic issue as insufficient hydrostatic oil. A hydrostatic mower relies on the movement of the oil to create pressure in the pump. The hydrostatic motor moves due to the oil force.
Now, air can enter the system and find its way into the hydro motor. Unlike oil, air cannot provide any driving force to the hydro motor and your lawn mower will not go uphill. The problem may not be noticeable if you are working on flat grounds but when you start working uphill, it’s a total disaster.
- Purge Air from the Hydro Transmission System
Hydrostatic lawn mowers are most likely to form air-locks in the oil system. Manufacturers acknowledge this fact and thus produce mowers with a simple air purging system. To eliminate the air from the hydro mower, you have to first raise the wheels with a jack. It is important to ensure that the mower is jacked securely.
Next, release the bypass valve to the hydro motor, start the engine and slowly increase the forward drive. Let the drive stay in full forward for a few seconds and then repeat the same process for the reverse drive. You’ll have to repeat this process severally.
In the next step, repeat the entire process with the drive engaged. In this case, you need to be extra keen since the wheels will be moving.
Are Hydrostatic Mowers Good For Hills?
Hydrostatic lawn mowers are generally great on hilly terrain. One of the advantages that come in handy with these cutting-edge technology tools is the speed and direction control that offers impressive manoeuvrability compared to other mower models.
On top of that, hydro mowers are stable on hills making them the best option for mowing uneven grounds.
What Causes A Hydrostatic Transmission To Lose Power?
The most common problem that causes a hydro system to lose power is the oil itself. Still, failure in any mechanical parts of the hydro system can also cause transmission problems – this includes clogged oil filters or a broken hose.
Why Is My Hydrostatic Mower Not Moving?
There are several possible reasons why your hydrostatic lawn mower is not moving. They include:
- A damaged drive belt
- A bad tensioner pulley
- A bad tension spring
- Old hydraulic fluid
- Insufficient hydraulic fluid
- Hot hydraulic fluid
- Air in the hydro transmission system
- A blocked fuel filter
- Damaged air filters
- An overheated engine
You should quickly troubleshoot the hydrostatic drives of your mower for any of the above problems. Nevertheless, if the problem persists, you can invite a professional.
If My Hydrostatic Mower Goes Slowly Up Hills, Can I Improve Performance?
Remember that hydrostatic transmission combines hydraulic pumps and motors to give you an increased range of speed for any terrain. So, if your Hydrostatic lawn mower goes slowly uphill then it probably has a hydro-air lock, insufficient oil, or lacks traction on the drive belt.
Therefore, you should follow the fixes explained above to improve the performance of your mower.
A hydrostatic lawn mower is the best option for hilly terrain. Nevertheless, like any other mechanical tool, the mower can at times exhibit a few problems here. Hope this detailed article has shed light on how to solve your mower problem on hilly terrains.
You noticed your riding lawn mower is cutting the turf too low or scalping your yard. Maybe it’s a brand new mower or it has been your lawn care companion for seasons. And you start wondering why...
A lawn mower air filter is one of the most important components in a lawn mower. It protects the gasoline engine from dirt and debris. Remember that for gasoline-powered lawnmowers, an air-gas...